From steel bar to barrel: how a Howa barrel is made

|Howa Rifles Europe
Howa barrels from steel bar to finished barrel

Most rifle makers buy their barrels. Howa makes its own, in the same plant where the receivers and bolts are machined. That is one reason a Howa shoots the way it does, and why we can stand behind it with a Sub-MOA guarantee.

It starts as a steel bar

The photo above shows the whole story in one row: a plain bar of chromoly steel on the left, a finished barrel on the right. Everything in between happens under one roof.

Cold hammer forging

The drilled blank is pushed over a mandrel that carries the rifling in reverse. Hammers then strike the outside of the steel many times per second and press it onto the mandrel. The rifling is not cut, it is formed. The result is a very smooth, dense bore surface that lasts a long time and cleans easily.

Howa hammer forging machine with barrels in front

Turning, chambering, threading

After forging, each barrel is turned to its contour: Standard, Heavy, Sendero or Superlite. Then the chamber is cut and the muzzle is threaded. Barrels for Europe come threaded, so a suppressor or muzzle brake fits without extra gunsmith work.

Howa barrels at different stages of machining

Finish

Finally the barrel is blued or, for stainless models, bead blasted. Only then is it fitted and headspaced to its action.

Rack of finished Howa barrels

Why it matters to you

A maker that forges its own barrels controls the steel, the tooling and the inspection. There is no supplier to blame and no batch from somewhere else. If you want that barrel in your own build, have a look at our barreled actions.

Back to the Journal